Classification of shearing machines

1. Dedicated:

Use in conjunction with other devices to achieve special purposes

a、 Cold bending forming line shearing machine: such as specialized shearing machines configured on production lines such as automobile longitudinal beam cold bending line, carriage side panel production line, color steel plate forming line, etc;

b、 Steel structure production line shearing machine: commonly used for automatic production lines of angle steel and H-beam to complete the shearing process;

c、 Plate flattening line shearing machine: a high-speed shearing machine designed to meet the fast cutting requirements of the production line on the plate flattening line. Hydraulic high-speed shearing machines are commonly used on thick plate lines, and pneumatic shearing machines are often equipped on thin plate lines; The high-speed line is equipped with flying shears for continuous production and high efficiency.

2. Multi purpose shearing machine:

a、 Joint punching and shearing machine: It can complete the cutting of boards and profiles, and is commonly used in the cutting process;

b、 Sheet metal bending and shearing machine: It can complete both cutting and bending processes on the same machine.

3. Slant blade shearing machine:

The upper and lower blades of the shearing machine form an angle, with the upper blade generally tilted at an angle of 1 ° to 6 °. The inclined blade shearing machine has a smaller shearing force than the flat blade shearing machine, so the motor power and overall weight are greatly reduced. It is widely used in practical applications, and many shearing machine manufacturers produce this type of shearing machine.

4. Flat blade shearing machine:

Good shear quality, minimal distortion, but high shear force and energy consumption. There are many mechanical transmissions. The upper and lower blades of the shearing machine are parallel to each other and are commonly used for hot cutting of initial rolled billets and slabs in steel mills; According to its cutting method, it can be divided into upward cutting and downward cutting.