Any machine will experience malfunctions during long-term use, and the sealing machine is no exception. In industrial production, what faults may occur during the sealing machine? Here are two common causes and solutions for the two major faults that are prone to occur during long-term use of the sealing machine.
Irregular marks appeared at the sealing point, which is a common fault. This is because there are many irregular concave and convex marks on the cold press glue machine. With the accumulation of time, the dust and other substances adsorbed by the sealing machine during operation will stick to the sealing machine, causing uneven heating and generating bubbles. The method to deal with this kind of malfunction is very simple, we just need to clean the sealing machine regularly or replace the cold press glue machine.
2. Products with insufficient sealing can easily allow air to enter the product, shorten the shelf life of the product, cause losses to the manufacturer, and inconvenience to everyone's reference. So, weak sealing is a very important malfunction of the sealing machine. This situation mostly occurs because the pressure of the cold pressing rubber wheel is not suitable, the heat sealing speed is too fast, or the temperature is not enough. In this case, it is only necessary to increase the heat sealing temperature, reduce the heat sealing speed, and increase the pressure of the cold pressing rubber force.
Cn
English
